Frame structure, high-strength bolt connection, good overall rigidity and small deformation. The beams of this series are fixed and the workpieces are fed by the rear feeding mechanism. The working table is made of carbon tools, and the hardness after high frequency surface quenching reaches 55-60HRC (ordinary table<30HRC).
The router is an upgraded product of the traditional router.
Frame structure, high-strength bolt connection, good overall rigidity and small deformation.
The beams of this series are fixed, the workpiece is fed by the rear feeding mechanism, and the working table is made of carbon tools.After high frequency surface quenching, the hardness reaches 55-60HRC (ordinary countertop<30HRC). The hardness of the worktable is much greater than that of stainless steel, which solves the problem of groove marks on the traditional model due to the low hardness of the worktable, ensures that the flatness of the worktable is ≤±0.03mm, and completely solves the problem of reducing the accuracy of the V-shaped groove due to the deformation of the worktable. The service life of the equipment is improved.
Supporting devices are installed on the front and back of the worktable to prevent the sheet from scratching during processing.